Turn off MathJax
Article Contents
Lei Zhang, Xinggang Shang, Simin Cao, Qiannan Jia, Jiyong Wang, Wei Yan, Min Qiu. Optical steelyard: high-resolution and wide-range refractive index sensing by synergizing Fabry–Perot interferometer with metafibers[J]. PhotoniX. doi: 10.1186/s43074-024-00138-3
Citation: Lei Zhang, Xinggang Shang, Simin Cao, Qiannan Jia, Jiyong Wang, Wei Yan, Min Qiu. Optical steelyard: high-resolution and wide-range refractive index sensing by synergizing Fabry–Perot interferometer with metafibers[J]. PhotoniX. doi: 10.1186/s43074-024-00138-3

Optical steelyard: high-resolution and wide-range refractive index sensing by synergizing Fabry–Perot interferometer with metafibers

doi: 10.1186/s43074-024-00138-3
Funds:  The authors thank the Westlake Center for Micro/Nano Fabrication for facility support and technical assistance. L.Z. thanks W. Wang at the State Key Laboratory of Extreme Photonics and Instrumentation for assistance with FIB.
  • Received Date: 2024-04-22
  • Accepted Date: 2024-07-25
  • Rev Recd Date: 2024-07-02
  • Available Online: 2024-08-15
  • Refractive index (RI) sensors play an important role in various applications including biomedical analysis and food processing industries. However, developing RI sensors with both high resolution and wide linear range remains a great challenge due to the tradeoff between quality (Q) factor and free spectral range (FSR) of resonance mode. Herein, the optical steelyard principle is presented to address this challenge by synergizing resonances from the Fabry–Perot (FP) cavity and metasurface, integrated in a hybrid configuration form on the end facet of optical fibers. Specifically, the FP resonance acting like the scale beam, offers high resolution while the plasmonic resonance acting like the weight, provides a wide linear range. Featuring asymmetric Fano spectrum due to modal coupling between these two resonances, a high Q value (~ 3829 in liquid) and a sensing resolution (figure of merit) of 2664 RIU−1 are experimentally demonstrated. Meanwhile, a wide RI sensing range (1.330–1.430 in the simulation and 1.3403–1.3757 in the experiment) is realized, corresponding to a spectral shift across several FSRs (four and two FSRs in the simulation and experiment, respectively). The proposed steelyard RI sensing strategy is promising in versatile monitoring applications, e.g., water salinity/turbidity and biomedical reaction process, and could be extended to other types of sensors calling for both high resolution and wide linear range.
  • loading
  • [1]
    Krohn DA, MacDougall T, Mendez A. Fiber optic sensors: fundamentals and applications. Bellingham: Spie Press; 2014.
    [2]
    Gupta BD, Verma R, Srivastava SK. Fiber optic sensors based on plasmonics. World Scientific; 2015.
    [3]
    Guggenheim JA, Li J, Allen TJ, et al. Ultrasensitive plano-concave optical microresonators for ultrasound sensing. Nature Photon. 2017;11:714–9. https://doi.org/10.1038/s41566-017-0027-x.
    [4]
    Xiong Y, Xu F. Multifunctional integration on optical fiber tips: challenges and opportunities. Advanced Photonics. 2020;2: 064001.
    [5]
    Jia Q, Tang W, Yan W, Qiu M. Fibre tapering using plasmonic microheaters and deformation-induced pull. Light. 2023;4:25–36.
    [6]
    Zou M, et al. Fiber-tip polymer clamped-beam probe for high-sensitivity nanoforce measurements. Light. 2021;10:171.
    [7]
    Shang X, et al. Fiber-Integrated force sensor using 3d printed spring-composed Fabry-Perot cavities with a high precision down to tens of piconewton. Adv Mater. 2023;36:2305121.
    [8]
    Simin C, Xinggang S, Lei Z, Ning W, Min Q. PDMS-filled micro-spring fabry-perot cavity for temperature sensing. Opt Express. 2023;31:30332–9.
    [9]
    Ma X, et al. High-sensitivity and fast-response humidity sensor based on a simple fiber-tip interferometer with thin agarose gel coating. J Lightwave Technol. 2023;41:6824–30.
    [10]
    Picelli L, van Veldhoven PJ, Verhagen E, Fiore A. Hybrid electronic–photonic sensors on a fibre tip. Nat Nanotechnol. 2023;18:1162–7.
    [11]
    Chen Y, et al. Nanodiamond-based optical-fiber quantum probe for magnetic field and biological sensing. ACS Sensors. 2022;7:3660–70.
    [12]
    Consales M, et al. Metasurface-enhanced lab-on-fiber biosensors. Laser Photonics Rev. 2020;14:2000180.
    [13]
    Sun X, et al. A quasi-3D Fano resonance cavity on optical fiber end-facet for high signal-to-noise ratio dip-and-read surface plasmon sensing. Light. 2022;3:665–75.
    [14]
    Xiong C, et al. Fiber-tip polymer microcantilever for fast and highly sensitive hydrogen measurement. ACS Appl Mater Interfaces. 2020;12:33163–72.
    [15]
    Cao S, et al. Two-photon direct laser writing of micro Fabry-Perot cavity on single-mode fiber for refractive index sensing. Opt Express. 2022;30:25536–43.
    [16]
    Xu Y, et al. Optical refractive index sensors with plasmonic and photonic structures: promising and inconvenient truth. Advanced Optical Materials. 2019;7: 1801433.
    [17]
    Hajshahvaladi L, Kaatuzian H, Moghaddasi M, Danaie M. Hybridization of surface plasmons and photonic crystal resonators for high-sensitivity and high-resolution sensing applications. Sci Rep. 2022;12:21292.
    [18]
    Chen R, et al. Nonlinearity synergy: an elegant strategy for realizing high-sensitivity and wide-linear-range pressure sensing. Nat Commun. 2023;14:6641.
    [19]
    Lu P, et al. Iontronic pressure sensor with high sensitivity and linear response over a wide pressure range based on soft micropillared electrodes. Sci Bull. 2021;66:1091–100.
    [20]
    Liang Y, et al. Subradiant dipolar interactions in plasmonic nanoring resonator array for integrated label-free biosensing. ACS Sensors. 2017;2:1796–804.
    [21]
    Chauhan M, Kumar Singh V. Review on recent experimental SPR/LSPR based fiber optic analyte sensors. Optical Fiber Technology. 2021;64:102580.
    [22]
    Zhao Y, Wang P, Lv R, Liu X. Highly sensitive airflow sensor based on Fabry-Perot interferometer and Vernier effect. J Lightwave Technol. 2016;34:5351–6.
    [23]
    Wei T, Han Y, Li Y, Tsai H-L, Xiao H. Temperature-insensitive miniaturized fiber inline Fabry-Perot interferometer for highly sensitive refractive index measurement. Opt Express. 2008;16:5764–9.
    [24]
    Williams JC, Chandrahalim H, Suelzer JS, Usechak NG. Two-photon nanomachining of a micromechanically enhanced optical cavity sensor on an optical fiber tip. Adv Photonics Res. 2022;3:2100359.
    [25]
    Gomes AD, Bartelt H, Frazão O. Optical Vernier effect: recent advances and developments. Laser Photonics Rev. 2021;15: 2000588.
    [26]
    Flannery J, Al Maruf R, Yoon T, Bajcsy M. Fabry-Pérot cavity formed with dielectric metasurfaces in a hollow-core fiber. ACS Photonics. 2017;5:337–41.
    [27]
    Shaltout AM, Kim J, Boltasseva A, Shalaev VM, Kildishev AV. Ultrathin and multicolour optical cavities with embedded metasurfaces. Nat Commun. 2018;9:2673.
    [28]
    Fu J, Jin Y, He S. Metasurface for constructing a stable high-Q plano-planar open cavity. Adv Optical Materials. 2019;7:1801339.
    [29]
    Ossiander M, et al. Metasurface-stabilized optical microcavities. Nat Commun. 2023;14:1114.
    [30]
    Ren H, et al. An achromatic metafiber for focusing and imaging across the entire telecommunication range. Nat Commun. 2022;13:4183.
    [31]
    Zhang L, et al. ‘Plug-and-play’ plasmonic metafibers for ultrafast fibre lasers. Light: Advanced Manufacturing. 2022;3:653–64.
    [32]
    Li C, et al. Metafiber transforming arbitrarily structured light. Nat Commun. 2023;14:7222.
    [33]
    Zhang L, et al. Plasmonic metafibers electro-optic modulators. Light: Science and Applications. 2023;12:198.
    [34]
    Luk’yanchuk B, et al. The Fano resonance in plasmonic nanostructures and metamaterials. Nat Mater. 2010;9:707–15.
    [35]
    Limonov MF, Rybin MV, Poddubny AN, Kivshar YS. Fano resonances in photonics. Nat Photonics. 2017;11:543–54.
    [36]
    Gu L, et al. A compact structure for realizing Lorentzian, Fano, and electromagnetically induced transparency resonance lineshapes in a microring resonator. Nanophotonics. 2019;8:841–8.
    [37]
    Cencillo-Abad P, Ou J-Y, Plum E, Zheludev NI. Electro-mechanical light modulator based on controlling the interaction of light with a metasurface. Sci Rep. 2017;7:5405.
    [38]
    Lan G, Wang Y, Ou J-Y. Optimization of metamaterials and metamaterial-microcavity based on deep neural networks. Nanoscale Advances. 2022;4:5137–43.
    [39]
    Auguié B, Barnes WL. Collective resonances in gold nanoparticle arrays. Phys Rev Lett. 2008;101: 143902.
    [40]
    Vala M, Ertsgaard CT, Wittenberg NJ, Oh S-H. Plasmonic sensing on symmetric nanohole arrays supporting high-Q hybrid modes and reflection geometry. ACS Sensors. 2019;4:3265–74.
    [41]
    Kravets VG, et al. Plasmonic surface lattice resonances: a review of properties and applications. Chemical reviews. 2018;118:5912–51.
    [42]
    Yi D, et al. Interrogation technique analyses of a hybrid fiber optic sensor based on SPR and MMI. Opt Express. 2020;28:20764–72.
    [43]
    Gong P, et al. In situ temperature-compensated dna hybridization detection using a dual-channel optical fiber sensor. Anal Chem. 2021;93:10561–7.
    [44]
    Xia F, Zhao Y. RI sensing system with high sensitivity and large measurement range using a microfiber MZI and a photonic crystal fiber MZI. Measurement. 2020;156: 107603.
    [45]
    Liu Z, et al. Refractive index SPR sensor with high sensitivity and wide detection range using tapered silica fiber and photopolymer coating. Opt Express. 2023;31:31768–79.
    [46]
    Huang H, et al. Effects of substrate on the femtosecond laser-induced damage properties of gold films. Opt Mater. 2018;81:115–21.
    [47]
    Gonzalez-Hernandez D, Varapnickas S, Bertoncini A, Liberale C, Malinauskas M. Micro-optics 3d printed via multi-photon laser lithography. Advanced Optical Materials. 2022;11:2201701.
    [48]
    Scaravilli M, et al. Excitation of bloch surface waves on an optical fiber tip. Advanced Optical Materials. 2018;6: 1800477.
    [49]
    Herráez JV, Belda R. Refractive indices, densities and excess molar volumes of monoalcohols + water. J Solution Chem. 2006;35:1315–28.
    [50]
    Aydin D, Barnes JA, Loock H-P. In-fiber interferometry sensors for refractive index. Appl Phys Rev. 2023;10: 011307.
    [51]
    Li Z, et al. Actively switchable beam-steering via hydrophilic/hydrophobic-selective design of water-immersed metasurface. Adv Optical Materials. 2021;9:2100297.
    [52]
    Lu J, et al. A Versatile metasurface enabling superwettability for self-cleaning and dynamic color response. Advanced Optical Materials. 2021;10:2101781.
    [53]
    Li F, et al. Affinity exploration of SARS-CoV-2 RBD variants to mAb-functionalized plasmonic metasurfaces for label-free immunoassay boosting. ACS Nano. 2023;17:3383–93.
    [54]
    Sun C, et al. Integrated microring spectrometer with in-hardware compressed sensing to break the resolution-bandwidth limit for general continuous spectrum analysis. Laser Photonics Rev. 2023;17:2300291.
    [55]
    Sun C, Yin Y, Chen Z, et al. Tunable narrow-band single-channel add-drop integrated optical filter with ultrawide FSR. PhotoniX. 2022;3:12. https://doi.org/10.1186/s43074-022-00056-2.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article views (16) PDF downloads(2) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return